View Single Post
  #36   Report Post  
Posted to rec.crafts.metalworking
Gunner Asch[_6_] Gunner Asch[_6_] is offline
external usenet poster
 
Posts: 10,399
Default How far could a golf ball be propelled at STP?

On Thu, 19 Jan 2012 14:42:14 -0800, Chrissy Degeer
wrote:

On 1/19/2012 1:25 PM, Gunner Asch wrote:
On Thu, 19 Jan 2012 11:03:06 -0800, Chrissy Degeer
wrote:

On 1/19/2012 2:57 AM, Gunner Asch wrote:
On Wed, 18 Jan 2012 23:46:30 -0800, wrote:

Gummer:

Which smoking crater? You really dont know any type of engineering at
all do you?

The charge belongs on the back of the club head, as I said.

On the Back of the club head???

****wit: from which side of a jet engine does the thrust emanate? The
back side, you colossally ignorant douchebag.


Thrust on a bullet is towards the shooter? Odd that


The clubhead is what strikes the ball. You're trying to make the
clubhead go faster. Putting the charge on the front of the clubhead
will slow the clubhead down.


Putting a charge behind an extending plate on the FRONT of the club will
not only add the Swing velocity and momentum, but will also add the
boost from the chemically fired plate. Will the net result be a
reduction of club speed after a certain amount of time? Yes indeed. But
by that time..the ball will be in flight nicely. Inertia is a wonderous
thing as well. Will it reverse the clubs direction? If you put a
whopping charge in the club, yes it could indeed. It could also grenade
the club head if improperly done.

Im putting a "second stage" on the clubhead.

Further more..the ball flexes when impacted by the club. It squishes
into a "pancake" and when it can no longer squish..it expands away from
the club head, traveling even faster than the club. Adding additional
velocity to the club impact zone will make the ball squish faster and
recoil faster away from the club head.

Setting something like a 32ACP blank inside the clubhead, with the
extending plate being at the end of a very short "barrel" with a pin in
the club head body will insure that the blank isnt fired until the ball
being compressed on the striker plate applies enough force to the plate
itself, and swings the barrel backwards into the clubhead with enough
force to detonate the primer, the blank and now launching the plate
forwards..along with the ball thats packed solidly on it.

You're stubborn in addition to being pig-**** stupid.


Im stubborn indeed. As for being pig **** stupid..Ill leave that up to
you.


Put the charge on the back of the clubhead, idiot. That will accelerate
the clubhead in the same direction in which you wish to strike the ball.


Thats one method. A hardly efficient method,


Much more efficient than your pig-**** stupid, boneheaded idea.


Your opinion is noted with amusment.


But putting a small rocket motor on the clubhead..really wont work very
well in this case Im afraid.


Better than your pig-**** stupid, boneheaded idea.


See above.


Better yet, ****wit, stick to jerking off - that's the only game you
know how to play.


So you really dont know an engineering whatsoever do you?


"know an engineering"? You're illiterate in addition to being pig-****
stupid and stubborn.


An(y) engineering. Your hate, bias, bigotry and buffoonery over a missed
letter is quite telling about the sort of varmint you appear to be.

Now was there anything else you wished to look stupid about?

Or should I simply expose your header infor again and let the people see
you are nothing more than the same buffoon who used a host of names to
troll with? You do know that most trolls are mentally ill, right? And
you are NO eception to that rule.

Gunner

One could not be a successful Leftwinger without realizing that,
in contrast to the popular conception supported by newspapers
and mothers of Leftwingers, a goodly number of Leftwingers are
not only narrow-minded and dull, but also just stupid.
Gunner Asch