View Single Post
  #6   Report Post  
Posted to sci.electronics.repair
Rheilly Phoull[_2_] Rheilly Phoull[_2_] is offline
external usenet poster
 
Posts: 207
Default adapting 12vdc to 9vdc

On 1/19/2012 6:55 AM, Chas wrote:
I plan to use a ''boombox" in my vehicle because the existing sound device
is defective and next to impossible to remove.
My boombox uses 6 AA batteries...would it be safe to just run a plug from
the 12v cig lighter to a power plug on the boombox? I imagine I will need
some sort of voltage reducer. Anyone got any ideas on how one could build
such a reducer. I am fearing such a device may induce noise.
. . . . .I am of an understanding that 1.5v batterys are acutally 1.2v. Is
this correct? If so, I could run the 12v car voltage to 10 AA batterys and
then tap off six batterys....
Else, if the AA's are truly 1.5 volts then run the 12v car power to 8 of the
AA's and tap off 6.
any help would be greatly appreciated.. . . chas


Just search for "three terminal regulator" until you find a circuit for
the 9volt one. This is a very simple circuit and easy to build, I have
had such in use for years in my vehicles. You can build it in a small
diecast box which would be strong and act as a heat sink for the regulator.

Rheilly P