Sears, I'll miss the tools
On Thu, 29 Dec 2011 14:56:01 -0800, "Steve B"
wrote:
LMMFAO!! a torque wrench on a drain plug!! oooooooo kayy.
Yes, to prevent overtightening.
Let me guess: you use an impact wrench.
I just put mine in until it contacts the threads. Then another half turn to
be sure. Then 12-18 thuds with a 3/8" air impact set at 90 psi just to be
sure. And one last twist with a breaker bar to see if it will move any more
at all.
So far, so good.
....now snug it up tight
|