A little project that needs a clamp
On 11/13/2011 1:31 PM, whit3rd wrote:
....
The problem is, all mortise chisels use a 0.625" round
barrel, and they have to be clamped (not possible in
wood, this is a metal part), ...
....
So, how else can I clamp the chisel?...
The typical way in such w/ wood is to drill the hole in the block, put a
kerf on one side for some clearance and then use one or more bolts,
tee-nuts or simply thread hardwood itself and tighten away...
--
|