View Single Post
  #15   Report Post  
Posted to uk.d-i-y
The Medway Handyman The Medway Handyman is offline
external usenet poster
 
Posts: 4,093
Default Lighting wiring problem - sanity check

On 12/11/2011 16:20, chudford wrote:
On Nov 12, 4:07 pm, "David WE wrote:
wrote in message

...
On Nov 12, 3:06 pm, "David WE wrote: Just set off to do my good deed of the day.
Replacing the PIR outside light by the front door which had given up the
ghost.


snip

*Hi
*Have you checked the switch?
*Your shorting of the various cables may have welded the contacts.

Not sure which switch you are talking about.
As noted in the original post the switch for the light has been checked and
the fault shows when the switch is isolated from the circuit.
So the fault must be in the power circuit or elsewhere in the downstairs
lighting.
Personally I've never seen contacts in a switch welded - circuit breaker
should prevent this.

--
No plan survives contact with the enemy.
[Not even bunny]

Helmuth von Moltke the Elder

(\__/)
(='.'=)
(")_(")


I speak from experience when sorting out a problem at my daughter's
house.
My son in law had connected up a light fitting incorrectly and had
wired the light switch between the live and neutral at the light
fitting.
This had welded the switch contacts. Took me ages to find the fault as
I had wrongly assumed that the switch must be OK.



I have done the same.


--
Dave - The Medway Handyman www.medwayhandyman.co.uk