What kind of cutting fluid, please?
On Mon, 7 Nov 2011 17:31:04 -0800 (PST), "
wrote:
I have a heat treated tube with an approximately 3/16" ID that I want
to ream out to a slightly larger dia.
The heat treat is at least 50, so I'll be using a solid carbide
chucking reamer.
So my question is, what might be an appropriate cutting fluid?
TIA
Lewis
*****
If it's RC 50 hard, you might consider lapping. Otherwise, lots of
sulfurized cutting oil, such as pipe threading oil.
Bob
|