On 10/27/2011 9:17 AM, Dave wrote:
My mother-in-law is having shoulder-replacement surgery following a
particularly bad fall, and I need to install a grab bar for her in the
shower. Her house was built in the '70s I believe, and the shower is
covered with ceramic tile up to about five feet. She has a stainless steel
bar that looks like it will work well, but I am not certain as to how to
install it for a trouble-free and usefull life. It is set up for 1/4"
screws, and I am wondering if anyone can tell me the best way to anchor it
ito ceramic tile. Any help is appreciated.

Thanks,

Dave



it needs to be screwed into the studs behind the wall behind the tile
behind whatever the tile is mounted to. your first task is to find the
studs. use a diamond or carbide bit (see the tile dept of home depot) to
get through the tile, then use a regular bit to get through to the stud
and drill a pilot hole in the stud for those screws.

use plenty of silicone sealant to prevent water intrusion.