View Single Post
  #15   Report Post  
Posted to alt.binaries.pictures.woodworking
Swingman Swingman is offline
external usenet poster
 
Posts: 10,043
Default The Murphy bed project

On 6/3/2011 4:22 PM, Leon wrote:
Well this large project has finally come to an end and the money is in
my pocket.

Oddly the bed was easier to bring into the customers designated room
than the two side towers. We had to lean the towers away from the door
opening to have enough room to slide them under the top of the door jam.
Using a towel under the tower we pushed the tower top away from the door
opening and used the towel to pull the bottom into the door opening.
Because there was a hall lamp directly above we had to lean, pull, lean,
pull and so on until we cleard the jam and lamp. WHEW! There was not
enough room to lean the tops of the towers towards the door opening. I
don't want to be around if they decide to remove them from that room.

Oak and Arkansas Black Walnut for the pulls. Drawers are KV G-slide full
extension side mount soft close. 4 adjustable shelve in each. Towers are
apparently 4 incher taller than I thought.


Absolutely magnificent, as usual, Leon!!


--
www.e-woodshop.net
Last update: 4/15/2010
KarlC@ (the obvious)