View Single Post
  #13   Report Post  
Posted to alt.binaries.schematics.electronic
Jim Thompson[_3_] Jim Thompson[_3_] is offline
external usenet poster
 
Posts: 2,181
Default 555 running hot.

On Thu, 12 May 2011 20:38:39 +0100, "Ian Field"
wrote:


"Jim Thompson" wrote in
message ...
On Thu, 12 May 2011 19:48:06 +0100, "Ian Field"
wrote:


"Sjouke Burry" wrote in message
...
Ian Field wrote:
Running at the full Vcc of 16V and the full frequency of 500kHz the 555
got so hot I had to add a clip-on heatsink.

Tried slowing it down to about 140kHz and the heatsink still gets
pretty
warm.

Is this normal?

Thanks.
Try again at a somewhat lower voltage, you may have exceeded
vcc for this particular unit and/or caused latching somewhere,
in which case almost the black magic smoke comes out.


Almost every datasheet I've seen says 16V - ISTR the Hitachi DS says 18V.


Perhaps a large capacitive load?



Been bench testing with no load (apart from driving the CR) and then with a
BC327/337 complementary emitter follower pair.


Post your schematic or a link.

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

Obama is not the solution, Obama is the problem!