View Single Post
  #7   Report Post  
Posted to sci.electronics.repair
Robert Macy[_2_] Robert Macy[_2_] is offline
external usenet poster
 
Posts: 796
Default Where to get: pump for recirculating liquid - need high flow rateagainst high back pressure

On Aug 22, 2:22*pm, Jeff Liebermann wrote:
On Mon, 22 Aug 2011 12:30:15 -0700 (PDT), Robert Macy





wrote:
OT, but you guys know where to find everything!


Anybody know where to get a 'recirculating' pump system that sucks up
liquid [mainly water based] and jumps the pressure up into the
40-60psi or even more range and can supply several gallons per minute
[first pass estimate] against back pressure, like attempting to block
the exit nozzle. *Hand held ON/OFF nozzle with a bore on the range of
3/16 to 1/4 inch, or 5/16 *[1/8 inch is too small and suspect 3/8 is
too large] *Like an air brush nozzle.


Need to be portable, 110vac, and run quietly.


Everything self contained: plastic/rubber tubes, pickup apparatus to
place in bottom of liquid container, hand held trigger nozzle with
push button ON/OFF control, and pump,


Any idea where to get this?


Electric bilge pump.
http://www.discountmarinesupplies.com/Pumps-Electric_Bilge_Pumps.html

--
Jeff Liebermann * *
150 Felker St #D * *http://www.LearnByDestroying.com
Santa Cruz CA 95060http://802.11junk.com
Skype: JeffLiebermann * * AE6KS * *831-336-2558


Thank you for the URL.

The pumps look like perfect form factor, pricing is good, but they all
use 12Vdc

I'll check about their ability to operate against head pressure.