On Jul 26, 12:18*pm, Jim K wrote:
On Jul 26, 12:00 pm, "ARWadsworth"
wrote:

All they all the same.

Or is there a bod standard oil I can use instead?

--
Adam

depends if you're bothered what it gets sprayed on when you're using
the saw..... motor oil is cheap but toxic in general and may spoil
plants etc.
Dedicated "chainsaw oil" is IME usually much more expensive (gloopier
& "anti-fling" claims) but can be had in "biodegradeable" flavours for
"sensitive" (garden) areas..

Depending on the saw, some specialised oils can't get out the
reservoir. Use red diesel. It's just to wet the surface the chain runs
on and lubricate the links. 3 in 1 would do. It works on a bike but
picks up grit and other muck and turns into a grinding paste.

Something light enough to run off quickly would be replaced just as
quickly. The most lubricant lubricant is castor bean oil. You can get
badly lurgied to that. But you can get allergies to any oils if you
expose yourself to the crap often enough.

At least with an heavier oil you might be less likely to skin
absorption. You pays yer munee an you takes yer chances.