Narrow 3 phase dist board wanted
On Jul 25, 2:31*am, Tim Lamb wrote:
In message , Andrew Mawson
writes
"Tim Lamb" wrote in message
.. .
In message , Andrew Mawson
writes
I'm looking for a narrow 3 phase distribution board - narrow so
that
it will fit inside a standard outside meter box so no more than
360mm
wide - only needs to be 4 way but more would be handy. (Standard
ones
seem to be 405mm so don't fit). This is for a local distribution
point
on the farm and the meter box is already in place. Any pointers
would
be appreciated - can be used if *in good nick.
Why can't you use a bit of SWA and stick the dis board inside the
building? Won't you need local isolation anyway?
regards
--
Tim Lamb
'cos this distribution point is mid way between three buildings each
about 50 metres away, and is sited in preparation for a container that
will be placed next to it in about a year!
Ah!
I have used individual metal clad switch fuses but my main intake is in
our hall and beginning to look over crowded.
Presumably you could daisy chain two?
Memshield 2 (125 amp TP) looks narrow but their website is pretty
impenetrable.
An expert will be along shortly:-)
regards
--
Tim Lamb
Use an MEM or similar *fuse*board, not MCB board, these are available
in a variety of sizes, depending on the amps rating and number of
ways, unlike MCB boards which are all the same width for three-phase
types.
|