In message , Andrew Mawson
writes
I'm looking for a narrow 3 phase distribution board - narrow so that
it will fit inside a standard outside meter box so no more than 360mm
wide - only needs to be 4 way but more would be handy. (Standard ones
seem to be 405mm so don't fit). This is for a local distribution point
on the farm and the meter box is already in place. Any pointers would
be appreciated - can be used if in good nick.

Why can't you use a bit of SWA and stick the dis board inside the
building? Won't you need local isolation anyway?

regards

--
Tim Lamb