"dadiOH" wrote in :


1. Get a 1/2" Woodslicer blade
https://skydrive.live.com/redir.aspx...&page=play&res
id=ED4947A9805111A1!621

What are you linking to?

*snip*

7. Reduce tension until you next need to saw

Note that wood is going to drift when ripping/resawing; i.e., the wood
will want to go through the blade at an angle. That is normal.


Is reducing tension, say two or three twists on the tensioning knob
sufficient, or should I release it as much as I can?

Puckdropper