On Jun 20, 9:31*pm, John Nagelson wrote:

Could you recommend a specific type of product (or product) out of
those that you mention?

It would depend on the mechanical load. If you're gluing it against a
shear load (the other end of the plywood is attached elsewhere), then
any would work (although cyano would need the plywood edge sanded
smooth first).

If it's a cantilever and this is the only support it's getting, then
I'd use epoxy. I'd use West System thin epoxy (I always do) and I'd
fill it with cellulose fibre filler to thicken it and make it
stronger.

If it didn't need to be rigid, but did need to not be brittle, then
I'd use silicone.