misted C electrolyte
On Fri, 17 Jun 2011 14:00:38 +1000 "Phil Allison"
wrote in Message id: :
"mike"
Clean it WELL with something like Simple Green. Use a toothbrush
and get it out from between chip pins, under chips, inside via holes.
Blow it dry and clean it again.
Then do it twice with high-concentration alcohol, like the 99% stuff
you can get a the drugstore.
** De-natured alcohol " (Methylated Spirits ) works fines to.
As do most PCB cleaner sprays.
Then dry it as hot as you can without breaking the parts.
150F is reasonable.
^
** 150C is highly unreasonable.
Indeed. But that's not what Mike said.
|