Plastic plumbing newbie advice
Roger Mills wrote:
On 08/06/2011 12:04, Ret. wrote:
When I replaced my bathroom 3 years ago I replaced all the piping to the
bath, sink and shower with polypipe. I looked at a couple of proper pipe
cutters but decided the cost was not worth it for a single job. I used a
junior hacksaw and then cleaned up the cut ends with a Stanley knife
(making sure no plastic swarf was left inside the pipe of course). The
entire bathroom has been 100% watertight since I did the job!
You'd make a good mate for Drivel then!
Kevin Loon (ret) is an ideal mate for Drivel.
They are both pillocks.
|