Fuse: fast blown vs slow blown
"Winston"
Phil Allison wrote:
"Winston"
** The price is very steep.
We agree.
** Yawnnnnnnnnnnnn....
But I expect the fuse IS safe when used in the Fluke DMMs it is specified
for.
Both the 'Fluke' brand and the commodity brand are safe, I suspect.
It wouldn't shock me to learn both kinds are sourced from the same
place.
** Nothing shocks a ****wit like you.
The scenario with a 0.125A fuse is nothing like the one with the 10A
range
fuse.
Typical 0.125A rated fast fuses have resistances of 8 to 10 ohms -
which
limits the fault current to a value the fuse can easily break.
A 10 amp fuse may well have a resistance of only a few milliohms, so the
fault current is only limited by the resistance of the DMM's leads.
A current of 40 amps is easy enough for a small fuse to break, while one
of
over 4000 amps is not.
We agree on that, too.
** GIANT Yawwnnnnnnnnnnnnnnnnnnn
**** off ******.
.... Phil
|