7/16 x 20 square nut
whit3rd wrote:
On Friday, May 6, 2011 4:25:37 AM UTC-7, Karl Townsend wrote:
On Fri, 06 May 2011 06:18:39 -0500, Pete Keillor
wrote:
On Thu, 05 May 2011 15:27:36 -0500, Karl Townsend
wrote:
Title about says it. I need a 7/16 x 20 square nut.
Do I have to make my own? No joy at fastenall or mcmaster.
Yep. On my 8N tractor there are two nut keepers with square fine
thread 7/16 nuts to bolt body to frame by the lower raditor.
So, either drill/tap a plate, then hacksaw to size and file to square,
or braze a square washer to a hex nut. Either is faster than ordering
a part from anyone's stock.
Just run a tap through a coarse thread square nut.
John
|