On May 7, 2:34*pm, John wrote:
I am about to begin reflooring the main level in the house. *One thing
I know I'll have issues with is the fact that the floor is not level.
I could see/feel dips and rises through the carpet, so I know I will
have to adjust the underfloor to some extent.

I did a search online for some ideas of how to best level the floor,
but none of the articles I found were very good. *For example, what's
the maximum thickness of leveling compound you should use? *When
should you shim instead of using leveling compound, etc? *What do you
do about rises right next to a wall (assuming the floor board actually
goes under the wall? *What unexpected special cases might I run into?
Nails or screws? *What about squeeks? etc

This is for the main level of the house, so I want to do this
properly, but I also have a time constraint. *I'd rather not run into
situations at the last minute that I hadn't thought of. *Does anyone
know of any good articles on the subject, or can anyone offer any
advice?

Thanks

John


@John:

You need to determine why your floor is "wavy"...

You could have uneven settling, problems with the building being
under-structured for the load or issues with the methods used to
attach the structural members together when the home was built
which are now weakening things...

Joists should be adequately supported by resting on the foundation
or by means of being attached to a beam using a joist hanger...

If it is your joists which are sagging due to age you can try
sistering
new joists next to the older failing ones...

This is something that to do correctly is not a DIY task unless you
are an experienced carpenter...

~~ Evan