View Single Post
  #6   Report Post  
Posted to rec.crafts.metalworking
Packratpaul Packratpaul is offline
external usenet poster
 
Posts: 7
Default R-22 Heat Pump update


"Tom Gardner" w@w wrote in message ...
I was able to get a cylinder of R-22 and the right manifold and hoses and finally it was good
enough weather to check out the system. Not good! First, the fan on the condenser wouldn't start
on it's own but a little push with a screwdriver got it spinning. The bearings seem OK so I
suspect the capacitor. Next, the compressor won't start, it just hums for a while then goes quiet
then repeats. Hmmmm. The static pressure on the refrigerant is 110 psi on both sides at 70
degrees F ambient.

So, I assume the worst on this 15 yo Trane and it won't be worth fixing. At this point I call in
a professional, a nephew of a friend on mine and see what he thinks. I'm a heat baby and like the
house at 67 and my bedroom at 60 or less...I have a modified window unit for that. The house is
all-electric and very well insulated, my largest electric bills are $200/mo for everything so I
don't expect to see huge savings with a new heat pump.



Try a hard start kit.....Paul

http://ths.gardenweb.com/forums/load...3327388.html?6