On 4/11/2011 10:32 AM harry spake thus:

The modern grid tie/connected "transformerless" inverter manipulates
the DC output from the panels so that they run on their "sweet spot"
ie the most efficient voltage and current. It self connects/
disconnects to the mains as and when there is sufficient light operate
the panels. I t uses the mains sine wave to generate it's own sine
wave on the AC side. The current delivered is indeed dependant on the
output voltage it dleivers to "push2 that current back into the
mains.

Bull****.

Bit on the topic here.
http://en.wikipedia.org/wiki/Kirchhoff%27s_circuit_laws
http://en.wikipedia.org/wiki/Grid_tie_inverter

Apparently you didn't even *read* that second article. It says:

The grid tie inverter must synchronize its frequency with that of the
grid (e.g. 50 or 60 Hz) using a local oscillator and limit the voltage
to no higher than the grid voltage.

Re-read that last phrase: "limit the voltage to no higher than the grid
voltage".

You don't "push" electricity from your solar installation into the grid
by raising the voltage, as someone here postulated. It just don't work
that way.



--
The current state of literacy in our advanced civilization:

yo
wassup
nuttin
wan2 hang
k
where
here
k
l8tr
by

- from Usenet (what's *that*?)