On 4/10/2011 10:46 PM, Phil Allison wrote:
"Jeff Thies"
Phil Allison wrote:

I suggest you provide the next replacement for that vulnerable tranny
with
some "protection" - firstly an in-line fuse of say 1/4 amp AND a
capacitor wired across the primary of say 1uF rated for continuous use
across the AC supply.

If there is an overload on the tranny, the fuse will blow.

The 1uF capacitor should suppress spike voltages enough to save the
tranny from harm.

1 uF sounds a little high.


** No it ain't.

I thought you had simply misspoke and that this was an honest error.

The reactance of a 1uF cap at 60Hz is: 2652 ohms (1/(2*pi*F*C)
Online calculator:
http://www.kusashi.com/reactance-c.p...&stage=results

V^2/R = W

Assuming primary, as why would you put it on the secondary:

120^2 / 2652 = 5.43 W

Does that not seem wrong to you?

** Completely.

Such a cap dissipates no energy at all.

What planet do you come from ??

What a jerk you are. You do realize that is 45mA running through that.

Jeff