Strangely marked BUZ Mosfet
"Phil Allison" wrote in message
...
"Gareth Magennis"
If there is any doubt what these oddly marked devices actually are I will
do just that.
** What does your PEAK say about the pin out and the Gate threshold
voltage ?
Should be Source on the case and about 0.5 to 1.0 volts.
.... Phil
Doesn't display voltage information, it either says its a "* channel mosfet"
and identifies the pins, or "no valid part found". Its a PIC based device
I believe.
I bought it purely to check Mosfets go or no go, and it works well.
Gareth.
|