Thread
:
Impact Driver recommendations - Makita TD0101F ?
View Single Post
#
6
Posted to uk.d-i-y
The Medway Handyman
external usenet poster
Posts: 4,093
Impact Driver recommendations - Makita TD0101F ?
On 05/04/2011 02:27,
wrote:
On Apr 4, 11:37 pm, The Medway
wrote:
On 04/04/2011 23:03, John Rumm wrote:
On 04/04/2011 20:54, george [dicegeorge] wrote:
I'm considering buying a corded impact driver,
So I can fix battens into walls with selftapping bolts,
and screw wood beams togethe, etc.
I have never tried a corded one, (unless you include pneumatic ones on
an air line!), but looking at the spec on that one, it actually delivers
less maximum torque than the 18V cordless one I use[1]. Having said that
90 Nm is probably more than adequate anyway so if you need to do lots if
fixing without pausing for a battery swap then its probably a good deal.
Makita TD0101F ?
http://www.makitauk.com/products/fro...&model=TD0101F
Is there a better or cheaper alternative?
If you already have a Makita cordless drill, (or other tool) the
cordless IDs can be very good value bought "body only" to use with the
same batts as charger. (my 18V one was about £80 odd quid that way IIRC)
[1]http://www.makitauk.com/products/front/?id=2115&model=6936FDZ
I have a corded Makita impact driver, can't recall the precise model
number, but its superb.
I bought it for decking because 6mm x 90mm coach bolts take a lot of
battery power and a corded tool takes the load off the battery one.
--
Dave - The Medway Handymanwww.medwayhandyman.co.uk
An ID for use the way TMH does - hundreds of large screws, one after
the other - I can see the need for corded. But for anything less
intensive, I would (I did) choose cordless in preference. Simply note
that cordless pro-models far outnumber cordless - most pro's are
choosing cordless.
I'll elaborate on that. I already had a 14.4v Makita impact driver with
3 x 3a/h Ni/Mh batteries. To speed things up I wanted a second impact
driver.
Since you remove a 'life' every time you discharge/charge a battery I
figured a mains driver was cheaper than replacing a battery - which
strangely it is. Battery being £70 odd.
I'd definitely go for cordless as the first choice, but the corded is a
handy tool.
--
Dave - The Medway Handyman
www.medwayhandyman.co.uk
Reply With Quote
The Medway Handyman
View Public Profile
Find all posts by The Medway Handyman