On Apr 5, 12:22 pm, Thomas Prufer prufer.pub...@mnet-
online.de.invalid wrote:
On Tue, 05 Apr 2011 01:45:56 +0100, Grimly Curmudgeon
wrote:
Adding a yagi or a simple reflector will extend the range. You don't
even need to spend a tenner, if you make a basic parabolic-like vertical
back to stick over the ordinary antenna on your router.
Ve haff vays of making your signal better.
http://www.heise.de/netze/artikel/Di...ne-223704.html
Thomas Prufer
that looks worth a go Cheers! However - when I read the Googgly
translated version the bit about the wire lengths and spacings is
rather lost on me:-
"The building materials are usually around as well. First, there is at
least 15 cm long residual electrical installation cables with solid
copper conductors; braided wire not good enough now. Usual, 0.75 mm 2
cross section, diameter of just 1 mm corresponds to a. For this
thickness, the element lengths are in the following table:
Dimensions of the 2.4-GHz antenna
Length Distance
50 mm 122 mm
51 mm 88 mm
51,5 mm 57 mm
52 mm 31 mm
53 mm 9 mm
60 mm -25 Mm
But a little thicker lines a For wire with 1.5 mm 2 (diameter 1.4
mm), the elements 1 mm shorter turn out each for 2.5-mm 2-wire
(diameter 2 mm) 2 mm shorter . It does not necessarily have the soul
of a copper cable may be, any other highly conductive, stiff and solid
material is also: welding wire, long nails or threaded rods. However,
would be for the optimum gain the dimensions adapted to the material.
For a first attempt with unnecessary objects you have to make the
effort not."
so what's the table on about??
TIA
Jim K