Mounted the knee motor
On Feb 26, 9:49*pm, "Dennis" wrote:
"Lloyd E. Sponenburgh" lloydspinsidemindspring.com wrote in messagenews:Xns9E98BC75A214Alloydspmindspringcom@2 16.168.3.70...
rangerssuck fired this volley in news:65b0ce59-
:
Make a cup out of duct tape and stick it inside the box to catch any
chips. Or, you could put a generous layer of grease on the drill bit
to pick up the chips.
Or you can drill through a wad a plasticine (modeling clay). *Common
trick.
LLoyd
Cheap $15 round hole chassis punch will do it. I bought some & use them for
other jobs too.
But the punch needs a hole to start in.
|