View Single Post
  #10   Report Post  
Posted to rec.crafts.metalworking
PrecisionmachinisT PrecisionmachinisT is offline
external usenet poster
 
Posts: 440
Default Lloyd, coolant pump


"Ignoramus27303" wrote in message
...
Just a little update on the coolant situation. The problem was that
debris such as milling chips, found its way to a steel tube with a 90
degree bend and lodged there, right in the bend.

They were very stuck in there.

You can see the tube in the middle on top of this picture.

http://igor.chudov.com/projects/Brid...tober-7820.jpg

Since this seems to be a regular occurrence, I bought a strainer at
McMaster-Carr, item 9875K413. This is an awesome deal at $15, it is
actually large and can clearly do a great job trapping chips. It is
also easy to clean and replacement screens are available, not that
they are needed. I got one with clear bowl, so I cal see the situation
inside.


When adding makeup coolant to the sump make sure and turn the pump off
first--afterwards, let settle for 10 minutes or so before turning it back
on....

--