dpb wrote:
dpb wrote:
....
Well, let's see if I can do enough ASCII art to get a picture as crude
as it will be for referencing to...

Arm pin (A) Cylinder Pin (U)
X --------------X--------O End actuator attach pin (E)
|
|
--X Lower cylinder pin (L)

....
the angle ALE is 96.4. The cylinder lift angle is the complement of
these two or 180-(75.5+96.4) = 8.1deg.

.... the angle ALU is 96.4. ...

....
... the lift at U was 2200 lb, ...

.... the lift at _E_ ...

...gave up on the posting of the pictures for the moment...

....

Coupla' typos noted above and here are a coupla' pictures took while
"gathering up" in preparation of loadout. First is just shot of bales
as rolled; second shows a couple of piles. Each group is a stack of 34,
what'll go on a flatbed so can load at one time instead of having to go
gather up while loading. The last is the home place; can just barely
see the house thru the cedars/and two largest elms...a little white
siding shows through.

http://picasaweb.google.com/104782889132331211356/UntitledAlbum?authkey=Gv1sRgCNbg6vPHmO6C1gE&feat=d irectlink#5565465227185160130

--