"Morgans" wrote in
:

IMHO, You do not have enough strength in the long 2 x's on the
outside. That will be the weak point, by far.

The 2 x's could be strengthened by standing one up fastened to the
one on the side. Either that, or some 1 1/2" x 1 1/2" x 3/16" angle
iron on the sides of them.

It's just to support a 4x8 ft sheet while doing preparatory cuts. It's not
designed to support 15 people grin.

--
Best regards
Han
email address is invalid