"Glenn Lyford" wrote in message
...
Need shallow grooves in wood, *lots* of shallow grooves in lots of wood.
At
least 48 in each side of dozens of 16 X 24" pieces of plywood and almost
as
many boards grooved on only one side.
It sounds like you need a gang saw.
Some brands of planers can be converted to use as a gang saw, like
this one:
http://www.woodmastertools.com/s/gang.cfm
There are also plans out there for making your own drum sander. I bet
you could redesign the drum on some of those to get closer to what you
want...
--Glenn Lyford
Reply:
for prototypes, stack saw blades with spacers like a Dado blade. Probably
do 3" of grooving with a standard table saw table.