View Single Post
  #21   Report Post  
Posted to rec.woodworking
-MIKE- -MIKE- is offline
external usenet poster
 
Posts: 5,721
Default bearings on the delta 14 inch bandsaw

On 12/29/10 11:18 PM, Mike Marlow wrote:
-MIKE- wrote:
On 12/29/10 10:18 PM, Bob AZ wrote:

To the WD40 users. 50 years ago WD40 was corrosive and has not
improved yet. Just leave a shiny chrome thing in it overnight and
look at it in the morning.


I just did. I'll report what I find tomorrow.


I'm not expecting any significant findings, but then you know how I am...


I'm expecting any surface rust from the inside of the section of chromed
tube to be sitting at the bottom of the cup, and for the chrome outside
to be very shiny and clean.

That is, unless I neglected to vacuum out all the oak saw dust that was
in the cup. In that case, there should be nothing but grains of
dissolved iron, that is of course, if it doesn't cause an explosion.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply