On Dec 28, 9:54*pm, "SS" wrote:
"geoff" wrote in message

...



In message , Skipweasel
writes
In article ,
says...
There should be a sensor which senses the level of water in the drum.
This is usually a round housing (about 3" dia) mounted near the top of
the machine. It contains a diaphragm and a microswitch. The diaphragm is
deflected by the pressure of air trapped in a plastic tube (~ 3/8"dia).
The pipe connects the sensor to the drum, via a 'spigot' at the bottom
of the drum.

It's a DISHWASHER!

If it's the Wadsworth rellies household, that's prolly where the drum kit
ended up

--
geoff

Could it be a problem on the setting dial, sticking at a certain point?
Try turning it a tad and see what happens.

It's electronic, no dials or knobs to turn! Pressing any buttons just
resets the machine at the beginning of the cycle!
But the info about something being gunged up could be useful. (and yes
it's a dishwasher)