"geoff" wrote in message
...
In message , Skipweasel
writes
In article ,
says...
There should be a sensor which senses the level of water in the drum.
This is usually a round housing (about 3" dia) mounted near the top of
the machine. It contains a diaphragm and a microswitch. The diaphragm is
deflected by the pressure of air trapped in a plastic tube (~ 3/8"dia).
The pipe connects the sensor to the drum, via a 'spigot' at the bottom
of the drum.


It's a DISHWASHER!


If it's the Wadsworth rellies household, that's prolly where the drum kit
ended up

--
geoff

Could it be a problem on the setting dial, sticking at a certain point?
Try turning it a tad and see what happens.