Dishwasher problem
In message , Skipweasel
writes
In article ,
says...
There should be a sensor which senses the level of water in the drum.
This is usually a round housing (about 3" dia) mounted near the top of
the machine. It contains a diaphragm and a microswitch. The diaphragm is
deflected by the pressure of air trapped in a plastic tube (~ 3/8"dia).
The pipe connects the sensor to the drum, via a 'spigot' at the bottom
of the drum.
It's a DISHWASHER!
If it's the Wadsworth rellies household, that's prolly where the drum
kit ended up
--
geoff
|