Samuel M. Goldwasser wrote in message
...
"N_Cook" writes:

First time for years (no salvaged one on hand) I replaced old with new
but
had forgotten about those antistatic shorting links, wasting time trying
to
find the short. Nothing on the box about the shorting link, only graphic
showing use antistatic wrist strap for assembly
Do they all have these solder-across semicircle land pairs?
This one Sanyo SF-P101 has them , so do KSS213 and K SM213, all ?
Is there something in the laser assembly that is especially prone to
static
damage?

Yes, the laser diode. There's generally very little circuitry between the
cable and laser diode and it can be damaged by any number of things
including
ESD.

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above
is
ignored unless my full name AND either lasers or electronics is included
in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.


But is a CD laser diode any more susceptible to ESD damage than a bulk
standard red LED or a 1N4148 say, in otherwise the same poor handling
circumstances?