Thread
:
Amount of lighting
View Single Post
#
237
Posted to rec.woodworking
J. Clarke[_2_]
external usenet poster
Posts: 1,366
Amount of lighting
In article -
september.org,
lid says...
In article ,
Bill wrote:
On 12/9/2010 12:31 PM, Bill wrote:
Thank you. That works for me! There will be enough "blue tape" around to
eliminate any confusion.
With new 3/4" conduit around, it makes one start thinking about the
possibility for those ceiling outlets that seemed like such a stretch
before... They are just a new roll of colored tape away! : )
Or even easier, just have them share a heavier circuit (which has
indirectly already been suggested). I'll have to sleep on it.
The odds of having the lights go out increase dramatically as soon as
you do that. I don't think I've _ever_ had a ballast "short out and blow
a breaker" - they usually fail much less dramatically and the tubes
associated with them stop lighting up. Not that it could never happen,
just hasn't in 40+ years.
Start hanging power tools off the same circuit and things change. I
detest lights and outlets on the same circuits because I've lived too
many places with that setup and learned to hate the consequences.
Just a comment but some receptacles on the lighting circuit can be handy
for adding supplemental lighting. One switch still controls everything.
But they should have non-switched receptacles right next to them on a
different circuit, and be _marked_ as to which is which--one way to
"mark" them is to use different colors for the switched and non-switched
and match the color of the receptacle and switch, i.e. brown switch and
receptacle for the switched and ivory receptacle for the non-switched.
Reply With Quote
J. Clarke[_2_]
View Public Profile
Find all posts by J. Clarke[_2_]