On 11/12/2010 07:51 AM, Bob La Londe wrote:
From the Sherline website.
"Due to the nature of the design of a 3-jaw chuck, it cannot be expected
to run perfectly true. Even 3-jaw chucks costing five times more than
the one made for this lathe will have a 0.002" to 0.003" runout. If
perfect accuracy is desired in a particular operation, the use of a
4-jaw chuck or a collet is recommended. Both are available for your
Sherline Lathe."
That's certainly been my understanding of 3-jaw chucks all along -- if
you want perfect accuracy you use a chuck with individually adjustable
jaws, and you run the part in with a dial indicator to establish runout
before you cut.
--
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" was written for you.
See details at
http://www.wescottdesign.com/actfes/actfes.html