So it seems simple - two 25pin D's and one 37 pin D.
Another option is all in one socket.

Molex is another option. Round Cannon is another option.

D's require a D shaped hole while cannon are screw on and are round
holes. Molex is typically square.

Consider the holes you have to mount them into.
Each end could be different - matching the machine to machine.

Martin

On 11/3/2010 8:51 PM, Karl Townsend wrote:
I need to make up connectors like you see on the back of a computer.
My servo amps have a couple 2 row 15 pin, a 2 row 25 pin, and a 3 row
26 pin places to connect.

I'm seeing a bewildering number of possibilities in digikey. FWIW the
connector plug I'm after is similar to this pictu
http://search.digikey.com/scripts/Dk...name=A32073-ND

or digikey part A32073-ND. I'm not after this part, just trying to
show the connector.

I'm not at all good at soldering in tight places. I much prefer
something that can be made up by crimping. I have a Molex type crimp
tool.

can someone suggest a good series of parts for this?

Karl