Thread: 3 phase service
View Single Post
  #22   Report Post  
Posted to rec.crafts.metalworking
KD7HB KD7HB is offline
external usenet poster
 
Posts: 127
Default 3 phase service

On Oct 25, 12:58*pm, Karl Townsend
wrote:
"The Kid" is putting in underground wiring to his outbuildings. For
now, power will come from the house to the shop.

The shop sits twenty feet from a three phase line. future plans is to
install a three phase service to the shop, cut the ordinal transformer
out, and then feed one phase back to the house from the wiring being
installed now.

OK, a one phase house service has two 110 legs on the same phase
opposite polarity to get 220 across the two hot wires, neutral is the
center tap. As I understand it you in effect get three 110 hot wires
120 degrees apart in the phasing for three phase with the center tap
for neutral.

So, can you run single phase 220 off this? Need any special provisions
installed now? He's putting in conduit - four wires - two hot, neutral
and ground.

Karl


One consideration that is not electrically oriented is if there is a
house fire and there is no meter for the firefighters to pull for
their safety, they will just stand by and watch the house burn.

Paul