Try HomeDepot or Lowes for the non-green ones, but I buy my Green ones
in bulk at Sam's Club

John

On Tue, 13 Jan 2004 13:22:42 -0800, "codepath"
wrote:

I went to the 3M web site and didn't see anything other than green and white
(and very little info on either of those).

Where do I get them?


codepath



"John Crea" wrote in message
.. .
Start with the green then work your way thru the finer grades up to
White

John

On Tue, 13 Jan 2004 11:56:14 -0700, "PBS" wrote:

Hi:

I've seen several posts in the past suggesting using a Scotch Brite pad
and
ROS for rust removal on Table Saw surfaces. Never paid much attention to
the details. My brother called to ask how to get the rust spots off his
saw. seems a skylight in the shop cracked, and his saw is directly in
the
path of the drip.

When I looked I was amazed at how many different "Scotch Brite" pads
there
are, in all sorts of different levels of abrasiveness.

Does anyone have information on which would be suitable for cleaning up a
saw table?

Thanks,
Paul