rectangulars hole in panel
On Sep 4, 4:23*pm, Joe Pfeiffer wrote:
I need to make a total of 44 rectangular holes in some reasonably thin
aluminum. *22 of them have to be .56" x .52"; 22 have to be .81" x .52"
How thick is the aluminum? And how far are the holes from the edge?
Can the aluminum be put an a mill or drill press? Can the panels be
stacked so you can do 22 at a time? From your thoughts about a punch
from Harbor Freight, I suspect the panels can not be put on a mill or
stacked.
Dan
|