Problem with a 1/2 inch spindle gouge
For some reason, my 1/2 inch spindle gouge is often
catching and pulling in the opposite direction I'm going,
only when I'm making a cove, tearing out quite a bit
of wood. This also happens less often with my 3/4 inch gouge,
and also when I'm making a cove cut.
I work downhill, and try to be careful about using the bevel
and cutting out a clean shave. I tend to get a catch more
when working right to left. I have no problems working with
other tools.
Any suggestions?
Thanks,
s
|