john hamilton wrote:
I have to connect this AAA battery holder to a toy. Although I have a small
soldering iron, my soldering skills are poor. I can see myself easily
melting all the plastic around the contacts before I can get anything to
stick to the tabs. (The part of the tabs with the small hole will bend
upwards giving some clearence).
http://tinypic.com/r/iqx3pf/4
My immediate plan is to poke a few strands of wire through the holes in the
connection tabs twist and then apply some nail varnish to stop it unwinding.
Since its a toy it does not need to be totally foolproof.
If anyone had any ideas that were a bit more sophisticated I would be
gratefull. Thanks.
Nobody else said it, so I will- if your attempted repairs end up
trashing the battery box, a 2xAA holder in pretty common, and should not
be hard to find at Radio Shack (or whatever the UK equiv is), or online,
like at MPJA.com. For a toy with a half-life of hours, I have even
taped the wires to the end of the battery, and jammed/taped them back
into the box. (may have to extend the wires to do that.)
--
aem sends...