View Single Post
  #7   Report Post  
Posted to uk.d-i-y
Andrew Mawson Andrew Mawson is offline
external usenet poster
 
Posts: 1,158
Default Best way to fill in an old swimming pool with high water table :(


"Lee Nowell" wrote in message
...
On 10 Aug, 15:32, Jim K wrote:
On 10 Aug, 10:00, Lee Nowell wrote: Hi All,

A friend has an old indoor swimming pool which he got converted

into a
playroom. They removed the inner lining and constructed a deck

over
the pool enabling him to use the old pool below as a good storage
area. This worked a treat until the winter rains came and it
transpired that the water table is very high and the pool was not
tanked on the outside. Net result water is seeping into the

storage
area and stinks!!


just re-read this - by "stinks" what do you mean? sewage? or mouldy
"cellar" smell?

Jim K


It is a stagnant water stench ......

You can hire sections of conveyor belt intended for moving spoil quite
cheaply, and in urban situations people seem desperate to give away
rubble to avoid skip fees, so it should be perfectly possible to
rubble fill it relatively easily and cheaply despite the distance.
Then a proper concrete floor can be installed delivering the concrete
by the same conveyor.

AWEM