On Aug 4, 9:02*pm, wrote:
On Thu, 5 Aug 2010 00:19:53 +0000 (UTC), Brent

wrote:
On Wed, 04 Aug 2010 18:51:52 -0400, jeff_wisnia wrote:

I don't think that the difference between 11.5 and 12 TPI would make
much of a difference

Assuming a garden hose is 3/4 inch and 11.5 TPI, and assuming a tap for 3/4
inch and 12 TPI would fix it ...

Is the consensus that a 3/4 inch tap and die with a 12 TPI pitch is
actually available on the market?

See if you can find a 9/16 x 12 *for both internal and external or a
1" x 12 for the external thread.

As it turns out the 2.00 section of my metric thread file is a perfect
fit for a hose end.