On Tue, 03 Aug 2010 15:35:15 -0500, Ignoramus30076
wrote:

in the second I
have to add an enclosure for the converter and a plug/receptacle to
the rotary table. This is so, because I may need to unplug the rotary
table and remove it from the mill from time to time.


#1 consideration.. the converter can go inside the old control cabinet.

#2 consideration...never never never put a plug/connector at the rotary
table. Run good quality shielded cable in a length long enough to plug
into the control cabinet on the side or bottom away from the machining
area and all chips and splash.

Gunner


"A conservative who doesn't believe? in God simply doesn't pray;
a godless liberal wants no one to pray. A conservative who doesn't
like guns doesn't buy one; a liberal gun-hater wants to disarm us all.
A gay conservative has sex his own way; a gay liberal requires us all
to watch and accept his perversion and have it taught to children.
A conservative who is offended by a radio show changes the station;
an offended liberal wants it banned, prosecuted and persecuted."
Bobby XD9