On Sat, 24 Jul 2010 09:31:30 -0500, "Karl Townsend"
wrote:
...
Here is the owners manual for most of the early versions..
http://omniturnfactorydirect.com/Omn..._G3_100128.pdf
Download it and go to section 6 and check the data for the AMC amps and
tuning. It may be of some assistance.
Gunner
Say, i scanned the gcode section trying to get to section 6. Omniturn has a
great write up here. Much better than the fanuc yellow manual I go by. Of
course, some Gcodes are different so i can't just copy it.
Karl
Ayup..each manufacture has different Gcodes, particularly canned cycles
and whatnot, but some of the stuff is pretty much common. Mike did a
very good job trying to make sure end users understood what was going
on, and why.
I had a small hand in some of the manual as well..but very small.
I had a slightly larger hand in writing some of these....
http://www.omni-turn.com/Pages/Techn...rt%20page.html
Stuff like this....
http://www.omni-turn.com/Pages/Techn...djustment.html
http://www.omni-turn.com/Pages/Techn...%20Tuning.html
http://www.omni-turn.com/Media/PDFs/...edure%20LR.pdf
And a fair number of the other stuff....shrug
One could not be a successful Leftwinger without realizing that,
in contrast to the popular conception supported by newspapers
and mothers of Leftwingers, a goodly number of Leftwingers are
not only narrow-minded and dull, but also just stupid.
Gunner Asch