On 2010-07-23, GeoLane at PTD dot NET GeoLane wrote:
I have a model 900 with the arbor sticking out both sides of the
motor. A former owner installed some sort of home made spindle on the
right hand arbor and I can't get it unscrewed. The left side arbor is
open and has right hand threads. I want to confirm that the right
hand arbor is also has right handed threads, othewise I've been trying
to tighten the accessory spindle on the right side.
I would expect it to be the opposite handedness so the
acceleration of the motor does not loosen the nut.
But I have no personal experience with a K.O. Lee.
Can you see enough of the threads (perhaps with a magnifier) to
be sure what direction it goes -- or are the threads totally covered by
the adaptor?
Good Luck,
DoN.
--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---