"David WE Roberts" wrote in message
...

"TheScullster" wrote in message
. uk...
Hi all

More kitchen stuff....
I intend to fit a Myson Kick Space heater to avoid using wall space for a
radiator.
In the "technical" manual downloaded, the instruction for connection of a
room stat states "If a remote room thermostat is required, wire it into
the fused spur at this stage".

All sounds far too vague for my liking!


So the questions a

What room stat to use?
Cable or flex to this stat and spec?
How is this "wired in to the fused spur"? Does the stat simply act as a
switch and need wiring across the live from the fused spur to the heater?


I assume that you have decided that you do really need a seperate
thermostat for the kitchen?

I fitted a kickspace heater in the last kitchen I did and it had an
inbuilt thermostat which turned the fan on when hot water was flowing.
This worked fine with a master thermostat in the hall and individual
thermostats on the radiators elsewhere.

Yes, that's the way ours work. They have a cold setting too though and as
they are below the sink cupboard, they tend to get knocked on with the toes
of anyone working there. How, they do not notice the noise is a mystery.

S

HTH

Dave R
--
No plan survives contact with the enemy.

Helmuth von Moltke the Elder